Hardwood Plywood Prefinished Plywood Technical Specfications
Technical Specifications
Coating Specification
 
Product Description System
1 2
Satin Clear Coat 2 coats Optiset sealer 2 coats UV Opticure Topcoat
 
Hot and Cold Check Testing
 
Panels subjected to twenty cycles; a cycle consisting of 1 hour at over 50 degrees Celsius, then 1 hour at -35 degrees Celsius, ending with 1/2 hour of recovery at room temperature. Cycle(s) of Crack Occurrence Pass/Fail 20 cycles
No cracking or blistering Pass
 
Adhesion (ASTM D3359-93)/Dry Film Thickness (ASTM D1005)
 
Cross-Cut Tape Test
(Scotch Brand 610 Tape)
% Adhesion
Coin Scratch
(U.S. nickel)
Mar Dry Film
Thickness
(MILs)
>95%
(4B classification)
Chipping to substrate - fair No 0.8
 
Chemical Resistance
 
Household Chemical Resistance: 24 hour exposure unless otherwise indicated
Tap Water No Effect Corn Oil No Effect
Hot Water No Effect Tincture of Iodine Stains
Grape Juice No Effect Rye Whiskey No Effect
Dish Soap No Effect Vinegar No Effect
1% TSP Solution No Effect Hot Tea No Effect
5% Detergent Solution No Effect Lemon Juice No Effect
Lysol No Effect Nail Polish Remover No Effect
Fountain Pen Ink No Effect Household Ammonia No Effect
Ball Point Pen Ink No Effect Black Permanent Marker No Effect
Hot Coffee No Effect Worchester Sauce No Effect
Black Crayon No Effect Ketchup No Effect
Black Liquid Shoe Polish No Effect French's Mustard (1 hr) No Effect
Red Lipstick No Effect French's Mustard (24 hr) No Effect
100% Alcohol (1 hour) No Effect 50% Alcohol (24 hours) No Effect
Acetone Rub (50 Double Rubs) No Effect  
Tests performed as per ASTM D1308
Meets - ANSI/KCMA A161.1 1990 9.0 finish tests